Shenzhen Erapower Electronics Company Limited
Main products:Mobile Battery,Power Bank,Laptop Battery,Solar Panel,Solar LED Bulb
Products
Contact Us
  • Contact Person : Mr. Wu Jay
  • Company Name : Shenzhen Erapower Electronics Company Limited
  • Tel : 86-755-29489588
  • Fax : 86-755-29489606
  • Address : Guangdong,Shenzhen,2/F, Bldg. C, Anhongji Industrial Park, Xinqu Blvd, Shangtang, Minzhi, Baoan District
  • Country/Region : China

2.8W Solar LED

2.8W Solar LED
Product Detailed
Solar LED 1, Voltage: 6v 2, power: 2.8w 3, application:indoor lighting or flashlight 4, work temperature 20-60C

Solar LED

Automatically turn on and off, however, there is also a manual on/off switch for your convenien.

Specification:

Model

Solar Powered LED Light

  Part No.

ERA-SP-LED-A

Lighting color: 

White

Number of LED

14PCS

Luminous Flux:

780LM

Color Temperature:

3000-5000K

Voltage: 

6(V) 

Power

2.8(W) 

Battery

7.4V/2200MAH

Lighting time:

9-16 hours

Size: 

D*L100*180mm

 Grading of Luminance: 

10% 50% 100%

Housing Material

Plastic

Color of housing:

White

Material of Lampshade

Transparent Plastic

Switch

Remote Control or on/off Switch

Power of Solar Panel

15W

Size of Solar Panel

65*278*498mm

Length of cable connected to Solar Panel

5.2M

Cable Length  

3.2M (or as per customer’s requirement)

Work Temperature

20 ~60°C

Life Span

50000 Hours

Application: 

Indoor lighting or Flashlight

    

USER MANUAL 

A. Pre-Installation

1. Decide how high to hang the lamps from the ceiling to produce the most favorable lighting conditions.

2. Adjust and position the solar panel at an angle that more sunlight will be absorbed from. 

 

B. Solar Panel Positioning

1. Determine the best position and angle for the solar panel.

2. Drill a hole through the roof for the pole 

3. Insert the pole through the hole, and attach the pipe clamps on the pole

4. Insert the cable extending from the panel into the hollow pipe. 

5. Adjust the angle of the solar panel by loosening the screws on the base of the solar panel mounting and tighten the screws to keep the fixture afterwards.

C. Hub Placement. 

1. Place the hub at an easily accessible location.

2. Hold the hub in place by screwing it into position.

D. Lamp Installation

1. Choose a position on the ceiling for lamp placement. 

2. Drill a hole as necessary for cable access

3. Pull cable connector through ceiling cover and screw the cover onto the ceiling.

4. Plug and twist the cable connector into both the hub and lamps

2.8W Solar LED



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.